Pull-Off Adhesion Testing
Aluminum Pull-Stubs, 1/2" in diameter, Pkg. of 100
Our standard ½" Aluminum Pull-Stub. Pack of 100 stubs
Aluminium Pull Stubs, 1/4" dia.
1/4 inch dia. pull-stub. Pk/100
Aluminum Pull-Stubs, 1/2" diameter x 1.5" long, Pkg. of 25
Pull-stubs for PATTI, 1/2" diameter with a 1.5" long stem/thread, Pkg. of 25
Adhesive Masks 300/roll
Tired of struggling to remove the cut-off rings before performing your PATTI Pull Test? Annoyed by the care needed to place a cut-off ring over the pull-stub without disturbing your uncured epoxy? SEMicro Adhesive Masks are the solution! If you are familiar with adhesion testing, you know how important it is to reproduce the area that is...
Aluminum Pull-Stubs, 3/4" (20 mm) in diameter, Pkg. of 20
Suitable for testing in accordance with ISO standard (20mm). These pull-stubs (pictured on the right side in the image shown) were designed for applications with very tight requirements on the testing area. These may also be utilized if you have already been using a PATTI system / piston to test one coating and find that you now need to test a ...
Aluminum Pull-Stubs, 2" (50 mm) in diameter, Pkg. of 10
Perfect for testing coatings on concrete! These are the largest diameter pull-stubs that we stock. They are perfect for testing coatings on concrete and asphalt because the large diameter reduces the chance that you will be testing directly over a piece of aggregate which could negatively impact your results. Rather than having their own thre...
Stand-Off Ring and Threaded Stud
Required if using larger than 1/2" diameter pull-stubs.
Elcometer-Type Pull-Stubs (Dollies), Pkg of 50
Elcometer-Type Pull-Stubs (Dollies) for Elcometer model 106 and others. Pack of 50
PIPS Pull-Stubs, 1/2" diameter, Pkg of 100
Patent# 6,282,950 B1PIPS (PATTI Instant Pull-Stubs) were designed to help our customers who require a fast turnaround. These new pull-stubs come with an adhesive that cures in two minutes using high-intensity light which significantly reduces the curing time required by most epoxies. Our adhesive has a bond strength greater than 2,000 psi a...
Adhesive for PIPS - Light Cured
This is a light-cured adhesive designed to be used with our PIPS system. In general, the adhesive cures in less than 5 minutes using a high intensity light. This significantly reduces the curing time required by most epoxies! No mixing needed. Our adhesive has a bond strength greater than 2,000 psi and works for many applications. To be used wit...
+-23625P.I.P.S. (PATTI Instant Pull Stubs) were designed to help our customers who require a fast turnaround. These patented pull-stubs come with an adhesive that cures in five minutes using a high intensity light which significantly reduces the curing time required by most epoxies. Our adhesive has a bond strength greater than 2,000 psi and wor...
P.A.T.T.I.® QUANTUM GOLD
Our most technologically advanced PATTI system ever!You won't believe what it can do! "The most accurate adhesion tester on the market!" "Looking to improve your Adhesion Testing results?" Read the following White Paper to learn more about our newest Patent-Pending Product (still in development) The GOLD Package now includes a...
P.A.T.T.I.® QUANTUM Digital
Detailed Description "Looking to improve your Adhesion Testing results?" Read the following White Paper to learn more about our newest Patent-Pending Product (still in development) "The most accurate adhesion tester on the market!" PATTI® QUANTUM FEATURES: The same quality you have come to expect from the PATTI® Powder-Coated box is muc...
P.A.T.T.I.® QUANTUM Analog
"Looking to improve your Adhesion Testing results?" Read the following White Paper to learn more about our newest Patent-Pending Product (still in development) "The most accurate adhesion tester on the market!" Looking for the Digital model? CLICK HERE. PATTI® QUANTUM FEATURES: The same quality you have come to expect from the PATTI® Po...
P.A.T.T.I.® QUANTUM CONCRETE Analog
The PATTI® QUANTUM CONCRETE Portable Adhesion Tester! "Looking to improve your Adhesion Testing results?" Read the following White Paper to learn more about our newest Patent-Pending Product (still in development) Includes accessories specific to concrete coatings testing, but may also be adapted for coatings on other substrates: Initially ...
P.A.T.T.I.®-K Analog Adhesion Tester
"The most accurate adhesion tester on the market!" "Looking to improve your Adhesion Testing results?" Read the following White Paper to learn more about our newest Patent-Pending Product (still in development) Looking for a Digital P.A.T.T.I.? CLICK HERE. P.A.T.T.I.-K® FEATURES: The same quality you have come to expect from the P.A.T.T.I...
P.A.T.T.I ® Expendables Kit
Complete PATTI Expendables Kit – Everything needed to perform a test – Often purchased in conjunction with a PATTI rental – Excellent value for technicians performing few tests Kit Includes 20 San*O*dized ½ inch pull-stubs 20 adhesive masks 1 two-part J-B Weld epoxy 6 mixing sticks 6 mixing pans 6 CO2 cartridges
Each piston comes complete with the required gasket(s), prelubricated and installed! The F-8/12 (F-20) Piston, the largest piston we stock at SEMicro, is like having 3 pistons in 1: an F-8, an F-12 and combined as an F-20. This piston is great if you will be testing many different coatings with different adhesion characteristics. It provides th...
Gasket for PATTI Pistons
Did you know the most common cause of unexpected results with the PATTI is poor gasket condition and/or lubrication? Replace your old gasket today and observe the improvement in your PATTI system! Our gaskets are made of an RTV material that is fairly resistant to abuse. However, should your gasket become chipped on the outer diameter or torn ...
It is important to lubricate your piston gaskets regularly to maintain smooth operation for your PATTI unit. Most piston problems can be traced back to poor gasket lubrication.
CO2 Cartridges 16 grams ea., Box of 6
16 gram CO2 cartridges is to be used with our newest QUANTUM series of P.A.T.T.I.® adhesion testers. The CO2 cartridges allow for maximum portability of the P.A.T.T.I.® system by eliminating the need for shop air. Compatible with our newest QUANTUM series of P.A.T.T.I.® QUANTUM Analog QUANTUM Digital QUANTUM Concrete QUANTU...
CO2Cartridges, 8 grams ea., Box of 10
Product Details 8 gram CO2 cartridges (Box of 10) for older non QUANTUM PATTIS units. These units include: PATTI Jr PATTI 2A PATTI 3 PATTI 110 The CO2 cartridges allow for maximum portability of the PATTI system by eliminating the need for shop air. Please contact us if you are unsure of the CO2 cartridge size of your instrument. ...
P.A.T.T.I.® Air Pump
PATTI Air Pump, use in place of CO2 cartriges, non-hazardous and environmentally friendly! This item may be out of stock! Please call (301) 975-9798 prior to ordering.
Short blue hose for fixed Piston connection - 4" long with fit
This is a replacement hose used for the fixed connection to the piston. This hose is only required if the short length of hose attached to your piston is leaking or has been separated from the piston and is lost. The end connection fittings are included.
Blue P.A.T.T.I.® to Piston Hose - 6 foot with fittings
This is a replacement hose used to attach the PATTI control module to the piston. The hose replaces the blue hose that originally came with your PATTI unit. The end connection fittings are included
J-B Weld Epoxy
The Original Cold-Weld Steel Reinforced Epoxy works on multiple surfaces. J-B Weld is a two-part epoxy system that provides strong lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. Applications Metal ...
3M DP460 Epoxy Refill 50 mL
The strongest adhesive we stock! 3M DP460 Epoxy refill, 50 mL / 1.69 fl oz. does not include plunger or mixing nozzles.
3M DP460 Epoxy Kit
Complete 3M DP460 Epoxy Kit includes: EPX Plus II Applicator 2:1 plunger (for use with DP460) 1:1 plunger DP460 1.25 ounce refill 10 mixing nozzles 3M's DP460 is our favorite all-purpose two-part epoxy! It is remarkably strong and frequently exceeds 6000 psi here in the lab. It is very good at bonding dissimilar materials, has a 60 minute wor...
Mixing Nozzles for DP460 Dispenser, Pkg. of 10
Mixing Nozzles for DP460 Dispenser. Eliminates the need for messy mixing by hand. Pkg of 10.
3M Scotch-Weld 1838 B/A Epoxy Adhesive Tube Kit
Good General Purpose Epoxy Adhesive 3M Scotch-Weld Epoxy Adhesive 1838 B/A is a high-strength, environmentally resistant room temperature curing, two-part adhesive for bonding many materials such as metals, ceramics, wood, glass and reinforced plastics. Net 3.6 Fluid oz. Mix with equal parts by weight A and B. Approximately 60 minutes of ...
Backing Plates, Pkg of 10
These Backing Plates enable the testing of flexible substrates (may differ from picture above). Simply adhere your sample to the backing plate to give substance to thin film coating systems and other thin substrates.
Adhesive Test Jig and Anchor Plate
This Adhesive Test Jig and Anchor Plate were developed to enable the testing of adhesives or other uncured coatings. The process is as follows: Thread up to 5 pull stubs into the base of the Adhesive Test Jig. Apply the adhesive or coating to be tested to several pull stubs (up to 5 at a time). Place the coated pull stubs face-to-face with...