P.A.T.T.I ® Expendables Kit
Complete PATTI Expendables Kit – Everything needed to perform a test – Often purchased in conjunction with a PATTI rental – Excellent value for technicians performing few tests Kit Includes 20 San*O*dized ½ inch pull-stubs 20 adhesive masks 1 two-part J-B Weld epoxy 6 mixing sticks 6 mixing pans 6 CO2 cartridges
Aluminum Pull-Stubs, 1/2" in diameter, Pkg. of 100
Our standard ½" Aluminum Pull-Stub. Pack of 100 stubs
Gasket for PATTI Pistons
Did you know the most common cause of unexpected results with the PATTI is poor gasket condition and/or lubrication? Replace your old gasket today and observe the improvement in your PATTI system! Our gaskets are made of an RTV material that is fairly resistant to abuse. However, should your gasket become chipped on the outer diameter or torn ...
Adhesive Masks 300/roll
Tired of struggling to remove the cut-off rings before performing your PATTI Pull Test? Annoyed by the care needed to place a cut-off ring over the pull-stub without disturbing your uncured epoxy? SEMicro Adhesive Masks are the solution! If you are familiar with adhesion testing, you know how important it is to reproduce the area that is...
CO2 Cartridges 16 grams ea., Box of 6
16 gram CO2 cartridges are to be used with our newest QUANTUM series of P.A.T.T.I.® adhesion testers. The CO2 cartridges allow for maximum portability of the P.A.T.T.I.® system by eliminating the need for shop air. Compatible with our newest QUANTUM series of P.A.T.T.I.® QUANTUM Analog QUANTUM Digital QUANTUM Concrete QUANTUM Gold ...
J-B Weld Epoxy
The Original Cold-Weld Steel Reinforced Epoxy works on multiple surfaces. J-B Weld is a two-part epoxy system that provides strong lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. Applications Metal ...
3M DP460 Epoxy Refill 50 mL
The strongest adhesive we stock! 3M DP460 Epoxy refill, 50 mL / 1.69 fl oz. does not include plunger or mixing nozzles.
3M Scotch-Weld 1838 B/A Epoxy Adhesive Tube Kit
Good General Purpose Epoxy Adhesive 3M Scotch-Weld Epoxy Adhesive 1838 B/A is a high-strength, environmentally resistant room temperature curing, two-part adhesive for bonding many materials such as metals, ceramics, wood, glass and reinforced plastics. Net 3.6 Fluid oz. Mix with equal parts by weight A and B. Approximately 60 minutes of ...
Adhesive for PIPS - Light Cured
This is a light-cured adhesive designed to be used with our PIPS system. In general, the adhesive cures in less than 5 minutes using a high-intensity light. This significantly reduces the curing time required by most epoxies! No mixing needed. Our adhesive has a bond strength greater than 2,000 psi and works for many applications. To be used wit...
CO2Cartridges, 8 grams ea., Box of 10
Product Details 8 gram CO2 cartridges (Box of 10) for older non QUANTUM PATTI units. These units include: PATTI Jr PATTI 2A PATTI 3 PATTI 110 The CO2 cartridges allow for maximum portability of the PATTI system by eliminating the need for shop air. Please contact us if you are unsure of the CO2 cartridge size of your instrument. This item ma...
P.I.P.S. (PATTI Instant Pull Stubs) was designed to help our customers who require a fast turnaround. These patented pull-stubs come with an adhesive that cures in five minutes using a high-intensity light which significantly reduces the curing time required by most epoxies. Our adhesive has a bond strength greater than 2,000 psi and works for m...
Aluminium Pull Stubs, 1/4" dia.
1/4 inch dia. pull-stub. Pk/100
Aluminum Pull-Stubs, 1/2" diameter x 1.5" long, Pkg. of 25
Pull-stubs for PATTI, 1/2" diameter with a 1.5" long stem/thread, Pkg. of 25
Aluminum Pull-Stubs, 3/4" (20 mm) in diameter, Pkg. of 20
Suitable for testing in accordance with ISO standard (20mm). These pull-stubs (pictured on the right side in the image shown) were designed for applications with very tight requirements on the testing area. These may also be utilized if you have already been using a PATTI system/piston to test one coating and find that you now need to test a si...
Aluminum Pull-Stubs, 1" in diameter, Pkg. of 20
These pull-stubs (pictured on the left in the image shown) were designed for applications with very tight requirements on the testing area. These may also be utilized if you have already been using a PATTI system/piston to test one coating and find that you now need to test a significantly weaker coating. By increasing the diameter of the pu...
Aluminum Pull-Stubs, 2" (50 mm) in diameter, Pkg. of 10
Perfect for testing coatings on concrete! These are the largest diameter pull-stubs that we stock. They are perfect for testing coatings on concrete and asphalt because the large diameter reduces the chance that you will be testing directly over a piece of aggregate which could negatively impact your results. Rather than having their own thre...