This pen is great for adhering samples to SEM stubs!
Designed for making instant conductive silver traces, the specially formulated silver-bearing thermoplastic polymer dries in minutes at room temperature. Valved pen tip allows smooth flow with normal writing pressure and is spring-loaded to prevent clogging.
The trace width is pressure-sensitive: for thin traces, hold the pen lightly; for thicker traces, apply more pressure while holding the pen.
If you wish to use the pen for traces, solderable terminations are possible using a 250 degree Fahrenheit cure for 15-20 minutes. Tin, lead, or silver solder can be used (do not exceed 350 degrees Fahrenheit for more than 5 seconds).
Each pen is filled with approximately 100 feet worth of traces. Approximately 39-45% silver with less than 10 micron diameter. Thinner is Butyl Acetate.
