Carbon Paint, Conductive
We made conducting, braided, polymer line by pressing this paint into the braid to impregnate the braid fibers. The conductivity of the resulting line is less than one megohm per meter. We can spool and unspool the line and conductivity remains stable. Folding and crushing the line ruins the impregnation, but that's not surprising: the polymer fibers don't stick to carbon. The paint itself is easy to work with. When it thickened, we thinned it with water and saw no loss of performance.
Works a treat! I have purchased multiple bottles of this product from SEMicro over the years for recoating conductive dags on arcade CRT monitors, and am always pleased with the results. I have recoated and touched up many arcade CRT's - color, B&W, vector, raster - and all work perfectly. Goes on smooth and even, dries quickly, covers large areas with ease, and provides the same 1Kohm resistance as decades-old original CRT coatings. A perfect match.
Conductive Lift-N-Press Carbon Adhesive Tabs
Conductive Lift-N-Press Carbon Adhesive Tabs(CLNP) are composed of a thin film of strong adhesive approximately 1/2" diameter. Over 99% transparent to EDS, very small amount of nickel (0.6%) and copper < 0.3%. To apply tab, remove one tab from the roll, press onto surface where you want the film, lift "tab" and peel off by slightly rotatin...
Conductive Silver Epoxy – 14 g Kit
Electrically Conductive Silver Epoxy Use this two-part electrically conductive silver epoxy for adhering microscope samples and solderless connections. Also good for bonding in electric design, prototype and repair projects. Applications include circuit board repairs, surface mount connections, static discharge, shielding, and grounding. Ideal...
Conductive Silver Kit
Not sure which conductive product you need? Do you need several conductive products and want to save money? This kit was made for you! Kit Includes (1) Silver Pen, (1) Silver Epoxy and (1) bottle of Silver Paint of your choice. About the Silver Pen: This pen is great for adhering samples to SEM stubs! Designed for making instant conductive sil...
Conductive Silver Pen
This pen is great for adhering samples to SEM stubs! Designed for making instant conductive silver traces, the specially formulated silver-bearing thermoplastic polymer dries in minutes at room temperature. Valved pen tip allows smooth flow with normal writing pressure and is spring loaded to prevent clogging.The trace width is pressure sensit...
Lift-N-Press™ Adhesive Tabs
Lift-N-Press™(LNP) Adhesive Tabs are composed of a thin film of strong adhesive approximately 1/2" diameter. They are a convenient, clean, economical method of mounting samples. They are particularly useful where "wicking" presents a real problem. Be careful with look-alikes--- that may simply be adhesive dots for mounting photos! To use LNP si...
Silver Paint, 20% Silver, 30g brush-cap bottle
Conductive ink with real silver (Ag) particles This conductive ink is designed for use on flexible or rigid substrates and is commonly used for electrical grounding. Even the 20% formulation is listed at <0.4 Ohm/Sq; the other formulations are even MORE conductive!Our non-flammable, conductive, 20% silver paint doesn't dry out in the...
Silver Paint, 40% Silver, 30 gram brush-cap bottle
Conductive Ink with REAL SILVER (Ag) PARTICLES This conductive ink is designed for use on flexible or rigid substrates and is commonly used for electrical grounding. Even the 20% formulation is listed at 0.012 Ohm/Sq; the other formulations are even MORE conductive! Our non-flammable, conductive, 40% silver paint doesn't dry out in the bottl...
Silver Paint, 60+% Silver, 30 g Brush Cap Bottle
SP-60+ WATER-BASED SILVER FILLEDCONDUCTIVE INK/PAINT Our highest concentration of Silver Paint: >60%! New Formulation sticks well to glass! SP-60+ is a low viscosity, high solids, >60% silver-filled ink designed originally for high speed gravure and rotary screen printing processes. It is also suitable for spray and coating applications....